Segnalatore a luce rotante

098 285 342 Segnalatore a luce rotante Ø130 x 230 x Tensione [V] 12V

098 285 344 Segnalatore a luce rotante Ø130 x 230 x Tensione [V] 24V

098 285 394 Segnalatore a luce rotante Ø155 x 184 x 12V / 24V

Informazione tecnica:
trasmissione a cinghia a bassa rumorosità
[...]

098 285 512 Segnalatore a luce rotante Ø160 x 220 x Tensione [V] 12V

098 285 526 Segnalatore a luce rotante Ø140 x 225 x 12V / 24V

098 285 666 Segnalatore a luce rotante Ø152 x 240 x 12V / 24V

Informazione tecnica:
Metallized steel reflector with balance counter-weight
[...]

098 285 686 Segnalatore a luce rotante Ø140 x 147 x 12V / 24V

Informazione tecnica:
with 24V 21W BAY 9 s halogen bulb installed and a 12V 21W
BAY 9 s bulb for 12V operation included
[...]

098 287 300 Segnalatore a luce rotante Ø147 x 75,7 x 10V / 30V

Informazione tecnica:
10 flash patterns: Flashes single, double, triple,
rotating, alternating flashing - fast and slow
Programming of the beam pattern:
Connect the red and the green wire for a second (no
longer). After separation of the lines the beam pattern is
being reprogrammed. You can successively select all 10 beam
patterns.
Synchronization:
All beacons must be programmed on the identical beam
pattern. Then, all green wires of the beacons to syncronize
must be connected. Turn on the beacons which are now
synchronized. Wire Color: Red (+) Blue (-), green (control
line for beam pattern)
[...]

098 287 310 Segnalatore a luce rotante Ø147 x 170,9 x 10V / 30V

Informazione tecnica:
10 flash patterns: Flashes single, double, triple,
rotating, alternating flashing - fast and slow
Programming of the beam pattern:Programming is done
through the beam pattern switch (underside the housung)
Press for one second (not longer). You can successively
select all 10 beam patterns.
[...]

098 287 320 Segnalatore a luce rotante Ø147 x 77 x 10V / 30V

Informazione tecnica:
10 flash patterns: Flashes single, double, triple,
rotating, alternating flashing - fast and slow
Programming of the beam pattern:Programming is done
through the beam pattern switch (underside the housung)
Press for one second (not longer). You can successively
select all 10 beam patterns.
[...]

098 287 350 Segnalatore a luce rotante Ø148,5 x 82,8 x 10V / 30V

Informazione tecnica:
5 flash patterns: Flashes single, double, triple,
rotating, alternating flashing - two speeds
Programming the photo: Connect the red and green wires for
5 seconds. After separation of the cables, the light image
is re-programmed. All 5 photos and two speeds can be called
up one after the other.
Synchronization: All beacons must be programmed to the
same light image and then switched off. Then the green
wires of the beacons to be synchronized must be connected
and the lights switched on. After that all beacons are
synchronized.
[...]

098 287 360 Segnalatore a luce rotante Ø148,5 x 178 x 10V / 30V

Informazione tecnica:
5 flash patterns: Flashes single, double, triple,
rotating, alternating flashing - two speeds
[...]